AiM 4-Pin 719 (Push-In) Male Connector Only, each

Brand: AIM Sports

This is the same male 4-pin Binder "719" (plastic snap-together) connector used on almost every AiM sensor. If you want to make your own custom sensor, or if the cable on your existing AiM sensor has seen better days, this replacement connector will get you plugged in again.

The 719 connector is used with all AiM dash loggers (M3 Auto, MXL, MXL2, MXG/MXP/MXS/MXm) as well as EVO3 and EVO5 data loggers. This "male" side has the male pins and the outer collar. It will mate to the female side on the dash harness. Sold indiividually.

Note: Installation will require stripping the wires on your cable and soldering very small wires.