Brand: AIM Sports
This is the same female 4-pin Binder "719" (plastic snap-together) connector used on every AiM dash logger harness. If you want to make your own sensor harness, or if the cable on your existing AiM harness has seen better days, this replacement connector will get you plugged in again.
The 719 connector is used on all AiM dash logger sensor harnesses (M3 Auto, MXL, MXL2, MXG/MXP/MXS/MXm) as well as EVO3 and EVO5 data loggers. This female side is the "inner" plastic part with the female sockets. It will mate to the male connector found on nearly every AiM sensor. Sold indiividually.
Note: Installation will require stripping the wires on your cable and soldering very small wires.
