Brand: Loctite Products
Threadlockers and thread sealants will not bond to certain "inactive" surfaces including aluminum, stainless steel, magnesium, zinc, black oxide, cadmium, and titanium. The use of an activatorr is required on these materials to "activate" the surface for bonding. Loctite® SF 7649 Klean 'N Prime™ Anaerobic Activator also speeds the cure time, especially in cold temperatures or when there is a gap between the mating parts. 4.5 oz aerosol can.
To use, begin by cleaning off any heavy grease or dirt from the surface using your preferred degreaser. Then do a final cleaning by spraying a generous coat of Loctite SF 7649 Primer on the surface. Do not wipe off the Primer. Just allow the solvent to dry for about a minute, then apply the threadlocker, thread sealant, or retaining compound. If the part is kept clean and dry in storage, you can wait up to one month before applying the compound. Parts stored longer or which become contaminated in storage should be re-treated prior to compound application.
|Note: (HAO) = Hazardous, Air only. This item is considered Hazardous by UPS when shipped by air (3 Day Select, 2nd Day Air, or Next Day Air). A hazardous shipping charge of $68.50 will apply if shipped by air. The shipping cost estimate shown on the Review Cart page will already include this surcharge if applicable. This item cannot be sent by US Mail. We are not able to ship this item outside the USA or Canada. No hazardous shipping charge if shipped UPS Ground!|