Wilwood Adjuster Cable for 3/8-24 Brake Bias Bars, Blue Knob

Brand: Wilwood Engineering

This remote adjuster cable from Wilwood makes it easy to adjust front-to-rear brake bias on the fly, right from the driver's seat. Simply connect it to your dual master cylinder bias bar and you can change brake balance to deal with changing track conditions during a race.

Designed to work with any standard balance bar with a 3/8-24 threaded shaft. Can be connected to the right or left side. Includes a detented Blue plastic knob with decals for operation in either direction. The six foot cable can be shortened to suit any installation.

Note 1: Does not fit the larger 7/16-20 threads on some bias bars. Be sure to check your bar before ordering!

Note 2: Wilwood's instructions recommend using Loctite thread locker on the set screw. DO NOT USE LOCTITE. The chemicals in Loctite thread locker tend to attack the plastic and may damage the knob.