Brand: Sabelt
The innovative Spine from Sabelt is a pure competition seat with a fiberglass shell. Rather than a one-piece upholstered cover, individual high-density foam cushions (sold separately) support the driver. The modular pad system lets you customize the seat fit using just one shell size. Keeping the pads separate leaves channels for air circulation, but the shell also has aggressive slots in the corners which actually allow sweat and hot air to escape. The head bolsters are specially designed to work with your side cage nets, holding them in proper alignment. The gloss black gelcoat is fully exposed on the back of the shell and shows through between and around the black cushion pads. Five harness slots. Requires seat pad kit (Part Nos. SAB-RCSPINEPADxx, not included). Homologated to the new FIA 8855-2021 standard.
The Spine requires special FIA 8855-2021 side-mount brackets (sold separately). Conventional mounting brackets will not work with this seat.
Sabelt Spine XL Dimensions:
Length, front to back: 590mm (23 1/4")
Height, overall: 924mm (36 3/8")
External width at shoulders: 610mm (24")
External width at bottom (max): 475mm (18 3/4")
External width at mounting holes: 416.5mm (16 1/16")
Mounting holes: M12, 290mm (11 7/16") center-to-center
Internal width at head bolsters: 290mm (11 7/16")
Weight: 11.3 kg (25 lb)
| Note: (SL) = Large Package Shipping surcharge. This item incurs an additional large package shipping surcharge due to its size. The shipping estimate shown on the Review Cart page will already include this surcharge if applicable. This item cannot be sent by mail. |
