Quick Patch Mini 2" x 3" Peel-N-Patch

Quick Patch is an innovative, easy-to-use repair patch system with unlimited applications. Each Quick Patch Peel-N-Patch has pre-applied adhesive, so they are clean to use and easy to apply in a hurry. The flexible patch cures when exposed to UV light (natural or artificial), quickly solidifying until it is hard enough to saw, drill, file, sand, and even paint to match the repaired item.

The fiberglass-reinforced polyester/plastic composite fabric bonds to just about any hard surface (except Polypropylene/PP). The cured patch is strong enough to reinforce a hammer handle, yet flexible enough to repair the clip tabs on a modern plastic bumper cover. The patch will not shrink or expand during curing, so what you apply is what you end up with. Curing time ranges from 5 to 30 minutes depending on the intensity of the UV light available. In less than an hour, the patch is ready for final shaping, sanding, and painting.

The cured patch is waterproof, can withstand temperatures from -40° C to 200° C (-40° F to 392° F), and is UV and weather resistant. Cured patches are Class 1 fire rated and have a dielectric strength of 9 kV/mm.

This 2" x 3" (50mm x 75mm) size is the smallest Peel-N-Patch available. It can be trimmed even smaller prior to application (be sure not to leave the remainder out in the sun or it will cure before you use it). Since there is no mixing or measuring, you can cut to any size or shape needed without having to do any other work. Sold individually.

Recommended (but not required): The Quick Patch UV Flashlight (Part No. QP-UVFLSH-51, sold separately) makes a convenient and reliable UV light source, perfect for use indoors or on cloudy or rainy days.