Lifeline Flashing LED Rainlight, FIA 8874-2019, Snap-On Lens

This FIA-approved flashing rain light features 11 high-intensity red LEDs in a tough but lightweight plastic housing. The compact size (3 15/16" tall x 2 7/16" wide | 100mm tall x 62mm wide) makes it easy to mount anywhere.

The 4 Hz flashing pattern (required by some racing organizations) alternates between the full 3269 candlepower output and 40% output, ensuring that the light is visible at all times. The light can also be wired to burn steady instead of flashing, or use a DPDT switch (available separately) to select solid or flashing modes.

The red LEDs are arranged in two outer rows of 4 plus a center row of 3. Three separate circuits ensure that if one red LED fails, the light will continue to meet FIA requirements. The light can be mounted vertically or horizontally to fit just about any installation from LMP2 to GT3. The upgraded clear protective lens now snaps in place, making it easier to remove for cleaning.

Runs on 9 to 14 volts DC power and draws 700mA at 12 volts. Two mounting studs on the back allow for easy mounting (note that the power cable also exits the back of the housing, which may require a third hole in the panel). Made in the UK. FIA 8874-2019 approved (RL.022.26) for racing per Technical List 76. Not DOT approved for street use.

Replaces Lifeline 421-100-005 (which was listed on the previous FIA Technical List 19) and Lifeline 421-100-011 (FIA RL.001.21, which had identical specs to this one but the clear lens was held on by 8 screws).