AiM Cable Only w/719 Connector for VDO Sensor

Brand: AIM Sports

This is the same cable that used to be supplied with our AiM VDO pressure sensors (formerly Part Nos. MC-204, MC-320, and MC-323). The VDO sensors are no longer available, but we will continue to stock replacement cables for as long as we can get them from AiM. Replace a damaged cable or use it to hook up a custom sensor.

One end of the cable has a 4-pin 719 (plastic snap-together) connector and the other end has two wire terminals for attachment to the studs on your VDO sensor (not included). Approximately 15 inches long.

Note: This cable has a 1.8 kOhm resistor between Pin 1 and Pin 4 of the 719 connector. The cable is designed to work with a VDO sensor (not included) with an insulated return and without a warning contact. It will not work with common ground sensors.