AiM Pressure Sensors for AiM Data Loggers

All of these analog pressure sensors are designed specifically for use with AiM data loggers, dash loggers, and street dashes. Each has a 50cm (19.7") long cable permanently attached with a "719" (4-pin snap-together) Binder connector on the end. Most applications will require the addition of a patch cable or an adapter cable.

Note: The current generation of AiM pressure sensors all require a "+Vb" (battery voltage) power supply, not the traditional "Vref" (5 volt reference signal) used on previous sensors.
MyChron3 and older (except XG-Log) do not have the necessary +Vb supply on any channel.
MXL Pista only has the +Vb supply on Channels 4 through 8.
MXL Pro(05) only has the +Vb supply on Channels 8 through 11.
EVO3 Pista only has the +Vb supply on Channels 4 through 8.
EVO3 Pro only has the +Vb supply on Channels 8 through 12.

MyChron Expansion, Channel Expansion Hub, EVO4, and all current EVO and MX-Series loggers have the necessary +Vb supply on all analog channels.