Quick-Disconnect Socket to 3/4 NPT Male, 5000 Series

Brand: Jiffy-tite

The 5000 series will flow 7.86 GPM with a 5psi inlet pressure through a mated pair of valved fittings attached to 2 feet of -10 hose. Flow tests based on Stoddard solvent at 80°F. This fitting is valved; non-valved fittings are noted with an "A". The Jiffy-Tite 5000 Series Sockets will mate to any Jiffy-Tite 5000 Series Plug. They will not mate to the 2000 or 3000 series Plugs.

Check out these features:

• Standard fluorcarbon seals are resistant to gas, oil, water and coolant.
• 100% leak tested.
• Patented design.
• Lightweight.
• Compact, yet feature high-flow capacity.
• Excellent wear resistance.
• Good-looking black and gold anodized finish.
• Completely rebuildable.
• Durable 6061-T6 aluminum bodies and brass valves.
• 200psi maximum operating pressure.

The 3/4 NPT male thread is the largest available from Jiffy-tite.

Note: NPT nomenclature can be confusing because the nominal size refers to the inside diameter of a standard cast iron pipe, not the outside diameter of the threads. If you are not sure what size you need, please check out our Guide to Using NPT Fittings.