Don't let your remote bleeder hose dangle! This unique fitting features a male 3AN (3/8-24) bulkhead thread for easy mounting in a panel or bracket, while accepting a standard 3AN hose end. The female end has the proper seat for a 3/8-24 bleeder screw (sold separately). Use it on the bleeder hose for your hydraulic clutch release bearing or on inaccessible inboard brake calipers.
Bleeder sold separately. Choose from our Standard 3/8-24 Bleeder Screw (Part No. 3266-01) or our 3/8-24 Speed Bleeder Screw (Part No. 3266-10).
Jamnut also sold separately: We recommend our 3/8-24 Self-Locking Jetnut (Part No. MS21042-6) or a standard 3/8-24 Non-Locking Jam Nut (Part No. AN316-6-R). One jam nut required per fitting.
Note: The 3/8-24 thread is slightly larger than the 8mm hole in the bellhousing of the Hewland Mk 9 gearbox (0.375" vs 0.315"). You can enlarge the hole in the bellhousing with a drill or a round file. Using a Q size drill will allow you to tap the hole with 3/8-24 UNF threads for even greater security. You should still use a jam nut even if you tap the hole.