This Window Net Installation Kit is used to mount a rectangular window net (sold separately) to your roll cage. This full kit includes both the top and bottom rods. When properly installed (bushings and buckle tab welded to the roll cage), this kit meets SCCA requirements.
Kit includes two 3/8" diameter steel rods, a seatbelt-style (pushbutton-release) buckle, the mating buckle tab, three hairpin retainer clips, and three steel bushings for welding to your roll cage to comply with SCCA rules. The buckle is supplied loose, so you can weld it to the top rod at exactly the position you need.
We also offer a Welded Window Net Installation Kit (Part No. 2304-002) with the buckle already welded to the top rod. Welding this buckle can be very tricky because too much welding heat can damage the small internal spring in the buckle.