Clearance Cylindrical Style 12 Volt Fuel Pump, 6-8 max psi

This is a Clearance Facet Fuel Pump. Scratch & Dent Fuel Pumps may have been emptied of their testing fluid, had wires trimmed, or just come in a worn out box. They are all tested and found to be in perfect working order.

For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.

Maximum fuel delivery 32 gallons per hour. Maximum pressure 6 to 8.5 psi. Typical flow 20 gallons per hour at 3 psi. 1/8 NPT female ports. Negative ground (12v) only.

This pump features an internal 74 micron filter. It is not equipped with an anti-siphon valve, so fuel may be pulled through the pump when it is turned off. Facet part number 476459(E)*. This pump can also replace Facet pump number 480541. It is also the same pump from the Facet FEP59SV kit, but without the mounting hardware and outlet fitting. Military NSN number 2910-00-847-9250.

* Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! The "E" stands for "Electronic".

Beware of counterfeits! We only sell Genuine Facet USA pumps - not the unreliable foreign knock-offs sold elsewhere.

Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.