Contains a full set of studs, washers and nuts needed to mount both the rear cover and bearing carrier at a significant savings compared to individual prices. Includes 8mm hardware for mounting the bearing carrier and 1/4 inch hardware for mounting the rear cover.
Please note that some late model Mk 9 bearing carriers now require nine short (1 1/4" overall length) studs in the main case, while most others use four short studs and five longer (3" overall length) studs. Photo shows 1413-2 kit with all short 8mm bearing carrier studs. Please check your carrier before ordering.
Protect your bearing carrier and main case from stripped threads with Perma-Coil Thread Repair Inserts! Installing these stainless steel inserts results in stronger threads that are more resistant to stripping, pulling, and galling.