Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

Aluminized Heat Barrier, Adhesive Backed

Click for a larger picture of Aluminized Heat Barrier, Adhesive Backed
View Catalog Page in PDF format

Our Adhesive Backed Aluminized Heat Barrier Cloth can be used to protect composite engine cowls, hoses, wires, painted surfaces, or any component that may be subject to damaging radiant heat. The Heat Barrier is made of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures in excess of 2000°F. This adhesive backed barrier can easily be applied to any clean surface or wrapped around hoses or wires. It not only protects, but also gives a neat and professional appearance.

Note: This cloth is not designed to be applied to the exhaust system. For an insulation that can be applied directly to the exhaust, see our Header Wrap (Part No. 1830).

We also carry Aluminized Heat Barrier Cloth without the adhesive backing in 40 inch wide rolls (Part No. 1832 - sold by the running foot).

Enter desired order quantities below, then click the "Add selected quantities to cart" button.

Order Qty
Part No.
Desc.
Price
Status

1828-12X12
Condition: New

Aluminized Heat Barrier, Adhesive Backed, 12" x 12" sheet

$14.29In Stock

1828-12X24
Condition: New

Aluminized Heat Barrier, Adhesive Backed, 12" x 24" sheet

$24.99In Stock

1828-24X36
Condition: New

Aluminized Heat Barrier, Adhesive Backed, 24" x 36" sheet

$66.99In Stock

1828-24X48
Condition: New

Aluminized Heat Barrier, Adhesive Backed, 24" x 48" sheet

$89.99In Stock
 
Related Product Groups
Heat Barriers & Insulation

i would buy this product again

5

this product is great sheilds heat well

cliffy

poughkeepise ,ny

true

Good product!

4

I had used this product before to protect footbox from header heat and also to isolate the master cylinder. I found it easy to work with and it stayed put. make sure the surface applied to is clean!

Mac

morganton NC

true

i would by this product again

5

i use this product to sheild engine heat

cliffy

poughkeepise ,ny

true

great product i would buy it again

5

works well to sheild against heat

cliffy

poughkeepise ,ny

true

Right on time

5

Exactly what I needed to protect certain items on the car. The adhesive holds up quite well.

David

Virginia Beach, VA

true

Aluminized Heat Barrier

4

First rate, does the job. Good adhesive backing sticks to less than perfectly smooth surfaces. Used it to line a fiberglass bumper near a hot muffler.

JT

Santa Barbara

true

Great product

5

I use this product as heat barrier on chassis. Self adhesive saves time.

Racerdell

Palm beach

true

great stuff

5

great for heat shielding of various panels facing hot exhaust pipes

Dryview

Hightown, Va

true

Application tricky

4

Used this on the back of a fiberglass engine cover to keep heat from discoloring paint. I wiped the area with alcohol before I applied the heat barrier (peel and stick adhesive). It is hot and humid here in SWFla. The barrier lifted in a few places after sitting overnight. I was able to get better adhesion with a heat gun and by wiping the hot barrier to remove all air. It seems ok now, haven't tested it with the cover installed. If it sticks, it should be fine.

nidrahynnad

Cape Coral, Florida

true

Worked Perfect

5

I used Aluminumized Heat Barrier on the back side and bottom of my new fuel cell for additional heat protection. Easily cut and applied.

Feff

Gateway To The West

true

Aluminized Heat Barrier, Adhesive Backed

4.7 10

100.0