DOM (Drawn Over Mandrel) tubing is required for all SCCA road racing classes. ERW (Electric Resistance Welded) tubing is no longer allowed in any SCCA road racing classes. Note: SCCA requires full roll cages in all road racing classes.
Cars up to 3500 pounds can use 1.75 inch x 0.120" wall ERW tubing, Cars over 3500 pounds should use 1.75 inch x 0.120" wall DOM tubing or (for non-SCCA use) 2.00 inch x 0.120" wall ERW tubing.
Due to environmental restrictions, as of March 2023 all roll bars are shipped bare (unpainted). Depending on the weather during shipping and after delivery, the mild steel tubing is likely to develop some surface corrosion. Expect to do some rust removal before painting your roll bar.
Bars are custom-made and ship Freight Collect directly from the manufacturer. You will be contacted by the trucking firm prior to delivery with the total delivery charges due. We cannot give freight estimates on roll bars. Please allow 4 to 8 weeks for delivery.
Note: Some race roll bars can be shipped via economical UPS Ground service. These bars are denoted by Footnote L in the Application List.
| After clicking “Add selected item to cart”, an Interactive Order Form will guide you through the ordering process for your custom roll bar. |
