Enter desired order quantities below, then click the "Add selected quantities to cart" button.
Carbon Steel Rod End, Female Threaded Shank
These economical yet high precision bearings are for moderately stressed joints. The ball is heat treated and hard chrome plated alloy steel, and the steel race has a PTFE fabric lining bonded to it. The low carbon steel body limits the load rating, but they will provide very long life in lower stressed or non-critical uses such as sway bar links or shift linkages. Female threaded shanks only. Typical female rod end shown in photo. Aurora MW-T (right hand threads) and MG-T (left hand threads) series.
We also offer matching Low Carbon Steel Male Threaded Rod Ends (Part No. 3060).
| PTFE Lined Carbon Steel Female Rod Ends | |||||
|---|---|---|---|---|---|
| Bore | Thread (UNF) | Thread Depth | Center of Bore to End of Shank | Radial Load Rating (Pounds) | Part No. |
| 3/16" | 10-32 | 5/8" | 1 1/8" | 1531 | 3061-3-L or -R |
| 1/4" | 1/4-28 | 3/4" | 1 5/16" | 2539 | 3061-4-L or -R |
| 5/16" | 5/16-24 | 3/4" | 1 3/8" | 3133 | 3061-5-L or -R |
| 3/8" | 3/8-24 | 15/16" | 1 5/8" | 3915 | 3061-6-L or -R |
| 7/16" | 7/16-20 | 1 1/16" | 1 13/16" | 4218 | 3061-7-L or -R |
| 1/2" | 1/2-20 | 1 3/16" | 2 1/8" | 6660 | 3061-8-L or -R |
| 5/8" | 5/8-18 | 1 1/2" | 2 1/2" | 7364 | 3061-10-L or -R |
Full Specifications for Part No. 3061 Rod Ends (PDF format)