Push-Pull Cable with 1 Bulkhead, 1 Clip-in End, 10-32 Thread

These heavy-duty cables are often used on adjustable sway bars, but they also work very well as shifter cables. Their operation is so smooth, some of our customers even use them as throttle cables.

One end of the housing is grooved (1/4" / 6mm OD) for easy clip-in attachment. This provides a compact and lightweight means of mounting with either our Bolt-Down Housing Clamp (Part No. 3464) or Quick-Release Housing Clamp (Part No. 3465).

The other housing end is threaded (7/16-20) and includes two jam nuts for easy bulkhead installation with approximately 3/4 inch of adjustment. These cables have a working load rating of 60 pounds in compression and 120 pounds in tension. Housing clamps sold separately.

Length is measured from end-to-end of the inner cable including the threaded ends.

These cables are rated for operating temperatures up to 225°F (107°C). If your application will exceed this limit, you will need to insulate your cable with one of our insulation products such as Aeroquip Fire Sleeve (Part No. 3299-.44) or Thermo-Tec Thermo-Sleeve (Part No. 1835-125).