Bolt-Down Housing Clamp plus Cable Fitting
This mount is for semi-permanent mounting of our Push-Pull Cables or Vernier Control Cables. The clamp portion has an internal ridge that matches the groove in the jacket of these cables.
The two parts in the right side of the illustration are a quick-release fitting that screws on to the 10-32 end of our cables. The fitting has a 5/16" OD shank which is cross-drilled to accept the spring clip. This provides an easy way to connect your cable to a 1/16" thick flat bar, such as a control handle.
Sway Bar Adjusters & Push-Pull Adjuster Cables
Click image for big picture