Enter desired order quantities below, then click the "Add selected quantities to cart" button.
Push-Pull Cable with Clip-in Ends
These heavy-duty cables are often used on adjustable sway bars, but they also work very well as shifter cables. Their operation is so smooth, some of our customers even use them as throttle cables. The 3" minimum bend radius lets them fit very tight installations. These cables have a working load rating of 60 pounds in compression and 120 pounds in tension. The stainless steel inner core makes them suitable for marine use.
Both ends of the housing are grooved (1/4" / 6mm OD) for easy clip-in attachment. This provides a compact and lightweight means of mounting with either our Bolt-Down Housing Clamp (Part No. 3464) or Quick-Release Housing Clamp (Part No. 3465). Length is measured from end-to-end of the inner cable including the threaded ends. Housing clamps sold separately.
| Standard Dimensions for Push-Pull Cables | |
|---|---|
| Thread | 10-32 |
| Housing Groove to Cable End (min) | 5 1/4" |
| Housing Groove to Cable End (max) | 8 1/4" |
| Travel | 3" |
| Jacket Length (Groove to Groove) | End-to-End Length Minus 13 1/2" |
| All dimensions are +/- 1/4" | |
These cables are rated for operating temperatures up to 225° F (107° C). If your application will exceed this limit, you will need to insulate your cable with one of our insulation products such as Aeroquip Fire Sleeve (Part No. 3299-.44) or Thermo-Tec Thermo-Sleeve (Part No. 1835-125).