Brand: Hawk Performance Products
Fits AP, Brakeman F4, CNC 627 / 628 / 636 / 654, Coleman Series I / II, Outlaw 3000 / 4000, Sierra/JFZ XL Series, and Wilwood Superlite / Superlite II / Superlite III LC-GT / Superlite 4 / Superlite 6 / LC-GT calipers. Replaces Wilwood pad shape 7320.
Hawk Ferro-Carbon brake pads do not require an extensive or complex "bedding-in" procedure. Keep in mind however, that all disc brake pads require a short period of bedding-in before being used to the maximum of their potential.
Black (M): Medium torque racing compound with high initial bite. Black is a good all-purpose, low cost racing pad. Requires gentle initial application of the brake pedal to avoid locking. Recommended for very light sedans, small formula cars, and sports racers. 100-900° F (200-700° F optimal).
DTC-30 (W): Medium torque racing compound designed specifically for dirt track racing. The smooth bite, controllable torque, and superior release are tuned for the demands of dirt. Low temperature effectiveness also makes it great for gravel. Recommended for dirt circle track and gravel rally stages. 100-1200° F (100-800° F optimal).
DTC-60 (G): Very high torque racing compound with high initial bite. DTC-60 was developed as a rear pad to be used with DTC-70 on the front, but it has also become popular as a front pad on lighter cars. Available only for a limited selection of popular racing calipers. Recommended for Trans-Am, GT1, CART, Formula Atlantic, F2000, F3000, and Sports Prototypes. 400-1600° F (700-1100° F optimal).
DTC-70 (U): Extremely high torque racing compound with very high initial bite. Designed to be the most controllable racing brake pad available. Intended for heavier sedans and formula cars with lots of tire and downforce. This compound works best when very hot. Available only for a limited selection of popular racing calipers. Recommended for Trans-Am, GT1, CART, Formula Atlantic, F3000, and Sports Prototypes. 400-1600° F (800-1200° F optimal).
HP Plus (N): Designed as an autocross (Solo II) and track day (Solo I) compound. Very wide temperature range makes it suitable for all forms of autocross, yet still streetable. Expect an increase in dust, noise, and rotor wear. 100-800° F (100-600° F optimal).
HPS (F): HPS = High Performance Street. This compound will outperform OEM pads without sacrificing street manners. A good choice for Solo II; also recommended for amateur to intermediate drag racing. Effective from dead cold up to 700° F (100-500° F optimal).
HT-10 (S): High torque racing compound with a smooth initial bite. Works well as a rear pad with HT-14 in front. Recommended for sedans, sports racers, and formula cars with downforce, including GT, Formula Atlantic, F2000, F3000, S2000, CSR, and DSR. 300-1300° F (500-1100° F optimal).
HT-14 (V): Very high torque racing compound with high initial bite for cars with high downforce and lots of grip. Recommended in Trans-Am, GT1, CART, Formula Atlantic, F2000, F3000, and Sports Prototypes. 300-1400° F (500-1200° F optimal).
