Brand: Induction Technology Group
ITG JC60-RN/P air filters represent a departure from traditional ITG design. Rather than multi-stage foam, the filter media is a pleated cotton gauze fabric sandwiched between two support screens. Each is finished with a rubber neck that can be clamped onto your rigid tubing. The top of the conical filter is a solid end cap. These filters are ideal for use either open or inside an airbox.
All sizes of JC60-RN/P filters measure 183mm (7.20") tall overall, with a 35mm (1.38") high neck and a 148mm (5.83") tall filter portion which tapers down to 115mm (4.53") OD at the top. Sold individually.
| ITG JC60-RN/P Filter Dimensions |
|---|
| ITG Part No. | Neck ID | Neck OD | Major OD
(Pleat Base OD) | Pegasus Part No. |
|---|
| JC60RN/70P | 70mm (2.76") | 80mm (3.15") | 150mm (5.91") | ITG-JC60RNP-70 |
|---|
| JC60RN/76P | 76mm (2.99") | 86mm (3.39") | 150mm (5.91") | ITG-JC60RNP-76 |
|---|
| JC60RN/80P | 80mm (3.15") | 90mm (3.54") | 150mm (5.91") | ITG-JC60RNP-80 |
|---|
| JC60RN/89P | 89mm (3.50") | 99mm (3.90") | 180mm (7.09") | ITG-JC60RNP-89 |
|---|
| JC60RN/102P | 102mm (4.02") | 112mm (4.41") | 180mm (7.09") | ITG-JC60RNP-102 |
|---|
| JC60RN/114P | 114mm (4.49") | 124mm (4.88") | 180mm (7.09") | ITG-JC60RNP-114 |
|---|
| JC60RN/127P | 127mm (5.00") | 137mm (5.39") | 180mm (7.09") | ITG-JC60RNP-127 |
|---|
