Order before 5:00 pm Central Time for Same Day Shipping on most In-Stock orders!
Pegasus stocks more than 1,000 different silicone hose part numbers!
Check us out on Instagram
Shop With Confidence - 30 Day Easy Returns - No Need To Call
Follow us on facebook

AiM 7-Pin to CAN/RS232 Wiring Harness for SoloDL/EVO4S, 2M

Click for a larger picture of AiM 7-Pin to CAN/RS232 Wiring Harness for SoloDL/EVO4S, 2M

Brand: AIM Sports

This harness connects your SoloDL/Solo2DL or EVO4S to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector which will fit the 8-pin port on the SoloDL or the 7-pin "ECU" port on the EVO4S, and the other end has 6 non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground).

This is the same 2-meter (6.6 ft) cable supplied in the AiM Solo2DL for CAN / RS232 Connection Kit (Part No. MC-672) and the old Solo DL kit (formerly Part No, MC-572). You can also use it to convert an AiM Solo2DL for OBD-II / K-Line Connection (Part No. MC-671). This all-in-one harness can also replace AiM cables V02585010 (CAN+Power), V02585040 (CAN only), and V02585060 (RS232 only).

Note: For SoloDL, Solo2DL, or EVO4S only. Not for standalone Solo/Solo2, EVO4, or EVO5. The 7-pin connector is not designed to work with any other AiM devices.

How can a 7-pin connector fit the 8-pin port on my Solo2DL?   The 7 pins around the outside of the connector have the same spacing and share the same functions. The 8th pin (which would be in the center of the plug) is not used on this cable.

Part No.
Stock Status

Condition: New

In Stock