Brand: Pegasus Auto Racing Supplies
This hose is built for endurance and performance in custom coolant and turbo intake plumbing applications. Silicone rubber with 4-ply reinforcement makes this hose tough, reliable, and flexible to temperatures from -60°C to +180°C.
This 4" (102mm) ID 180 degree elbow hose is hand-crafted and quality inspected to the highest European standards. Italian Red with a smooth, shiny "wipe-down" finish. Legs measure approximately 4 inches long (measured from the centerline of the U-bend). Leg spacing is 6" (150mm) center-to-center (3" centerline bend radius). The 4-ply reinforcement results in a working pressure rating in excess of 14 psi and a 5.5mm wall thickness (113mm / 4 7/16" OD). Use our Lined Hose Clamps (Part No. 3613-5.00) to clamp the hose over a 4" OD tube.
Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to petroleum.