Brand: Camloc Fasteners
This receptacle is installed on a vertical stationary structure to accept a Camloc 4002 Series Heavy Duty Stud (sold separately). 1/8" diameter rivet holes are spaced 1" apart.
To calculate the grip length to use with this receptacle, add the following numbers together:
Thickness of removable panel(s)
Grommet allowance (0.050" for Large Diameter, 0.026" for Standard, 0.000" for Flush)
Receptacle allowance (0.030")
Note: If the result is less than the minimum grip shown below, use a stud based on the appropriate minimum grip and locate the receptacle below the surface. The grommet will be in contact with the receptacle, but the panel will not.
Minimum grip lengths:
4002-N - 0.121"
4002-O - 0.146"
4002-N3 - 0.180"
4002-G - 0.120"
4002-H - 0.180"
(The above grip lengths apply when using the side mount receptacle only.)