Order before 5:00 pm Central Time for Same Day Shipping on most In-Stock orders!
We carry a huge selection of Competition Plumbing Parts!
Check us out on Instagram
Shop With Confidence - 30 Day Easy Returns - No Need To Call
Follow us on facebook

Aeroloc 51-07 Fastener, Bail Handle, Countersunk Holes, .80"

Click for a larger picture of Aeroloc 51-07 Fastener, Bail Handle, Countersunk Holes, .80"
Click for a larger picture of Aeroloc 51-07 Fastener, Bail Handle, Countersunk Holes, .80"
View Catalog Page in PDF format

Enjoy the precision of Camloc fasteners on panels originally drilled for Dzus quarter-turn fasteners!

Aeroloc fasteners bridge the gap between the vintage look of Dzus EHF5 fasteners (5/16" studs with diamond-shaped backing plate) and the modern durability and 700 pound working strength of Camloc fasteners. The stud and plate assembly is designed to replace the Dzus EHF5 assembly perfectly, so you don't need to patch holes or replace panels. Just remove the Dzus assembly and the receptacle spring, and rivet the Aeroloc assembly and receptacle in their place!

The stud assembly consists of the stud, spring-loaded tensioning barrel, and spring-loaded backing plate. The backing plate spring provides a self-ejecting action similar to Dzus fasteners. A bail handle (1.1" ring) allows quick fastening without tools, and the handle folds out of the way when not needed. The rivet pattern (2x 1/8" holes on 1 1/16" centers) matches the Dzus fastener plates, so there are no new holes to drill. The rivet holes are countersunk for a flush installation. (Note that the countersink requires a minimum 1mm / 0.0394" panel thickness.)

This -07 length stud measures 0.80" long overall. It is designed for use with either the Standard Aeroloc Receptacle (Part No. ALC205-1000) for thin grip lengths, or the Short Aeroloc Receptacle (Part No. ALC205-3000) for thicker grip lengths. This is the shortest length Aeroloc stud available. Shims are also available to move the receptacle farther back for even thinner grip lengths. Receptacles and shims are sold separately. Stud assemblies are sold individually.

Aeroloc 200-1007 Stud Grip Chart
Grip* Receptacle Shims Required
0.110" - 0.140" 205-1000 Standard 1x 205-9008 plus 1x 205-9015
0.140" - 0.170" 205-1000 Standard 1x 205-9015
0.170" - 0.200" 205-1000 Standard 1x 205-9008
0.200" - 0.230" 205-1000 Standard none
Grip lengths between 0.230" and 0.350" use -08 through -11 studs
0.350" - 0.380" 205-3000 Short 2x 205-9015
0.380" - 0.410" 205-3000 Short 1x 205-9008 plus 1x 205-9015
0.410" - 0.440" 205-3000 Short 1x 205-9015
0.440" - 0.470" 205-3000 Short 1x 205-9008
0.470" - 0.500" 205-3000 Short none

* Grip is the total thicknesses of the panels to be fastened together, plus any gap between them (for rivet heads, etc).

Part No.
Stock Status

Condition: New

1 to 5: $18.77 

6 & up: $18.30 

In Stock