Stainless Steel Banjo Bolt, 7/16-24, Short (.79")

This stainless steel banjo bolt has 7/16-24 (extra-fine) threads. Note that this is different than the 7/16-20 UNF thread used in -4 female ports. Sold individually.

Remember to order two Crush Washers (Part No. 3241-7/16, sold separately) with this setup.

Note: This bolt is designed for thin banjo fittings measuring approximately 8mm (0.33") thick. It will not work with standard 12mm (1/2") thick banjo fittings. These thick banjos should use our Standard (.98" Shank) 7/16-24 Stainless Steel Banjo Bolt, Part No. AF303-04L.