Brand: Facet-Purolator
| Was $125.19 - Now only $87.63 - You save 30%! |
This is a Clearance Facet Fuel Pump. Scratch & Dent Fuel Pumps may have been emptied of their testing fluid, had wires trimmed, or just come in a worn out box. They are all tested and found to be in perfect working order.
For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum fuel delivery 36 gallons per hour. Maximum pressure 4 to 5.5 psi. Typical flow 23 gallons per hour at 2 psi. 1/4 NPT female ports. Negative ground (12v) only. This pump features an internal 74 micron filter.
This pump does not have an anti-siphon valve, so fuel can flow through when the pump is turned off. Facet part number 40007(E)*. This pump can also replace Facet pump numbers 40134 and 40220.
* Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! The "E" stands for "Electronic".
Beware of counterfeits! We only sell Genuine Facet USA pumps - not the unreliable foreign knock-offs sold elsewhere.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.
