Order before 5:00 pm Central Time for Same Day Shipping on most In-Stock orders!
Pegasus is your source for Neoprene and Silicone Air Ducting Hose!
Check us out on Instagram
Shop With Confidence - 30 Day Easy Returns - No Need To Call
Follow us on facebook

AiM MyChron Water Thermocouple with 5mm Threads

Click for a larger picture of AiM MyChron Water Thermocouple with 5mm Threads
View Catalog Page in PDF format

Brand: AIM Sports

This Water Temperature Thermocouple has M5 (5x0.8mm) male threads. It is normally used for measuring coolant temperature in cars, motorcycles, and shifter karts. It can measure temperatures ranging from 0 to 302° F (up to 150° C), so it can also be used for most oiling systems.

This thermocouple is equipped with a K-Type (2-blade flat) connector. Some AiM MyChron4 2T and MyChron5 2T karting dashes* and a few MyChron3 and MXL auto dashes have the matching connector in their sensor harness. These dashes can use the MyChron K-Type Thermocouple Patch Cable (Part No. MC-203-01) to extend the reach if needed.

The AiM TC Hub requires the MyChron K-Type to 3 Pin 712 Adapter Cable (Part No. MC-008-01).

The MyChron XG-Log and the EVO4/EVO4S loggers will require the K-Type to 4 pin 712 Adapter Cable (Part No. MC-208-01).

All other AiM auto dashes and loggers without a K-Type plug require the AiM K-Type to 719 Adapter Cable (Part No. MC-221).

Note: Not compatible with standard MyChron4 or MyChron5. MyChron4 and MyChron5 use thermocouples for CHT and EGT but require the thermoresistor MyChron Water Temperature Sensor Kit (Part No. MC-040) for water temperature.

Part No.
Stock Status

Condition: New

In Stock