Brand: Pipercross Air Filters
Pipercross air filters have been used in every form of motorsport from Formula Ford to Formula 1.
This compact (7" L x 5.5" W x 3.5" H) filter is small enough to work on most cars even if the bodywork or air scoop is very close fitting. The three stage foam element draws air through the top as well as the sides to allow the greatest possible air flow for its size. The integral plastic base plate fits Weber 32/36 DGV carburetors and mounts the filter parallel to the valve cover on the Ford Kent 1600 Uprated and the Ford 2.0L SOHC Pinto engines. Simply place the included foam gasket on top of the carb top plate and drop the PX400 filter in place. Use the included O-rings and zip ties to secure the filter to the carburetor using the clips at each end.
The economical PX400 filter is not intended to be cleaned and re-oiled. It should be replaced at each engine rebuild, or after two racing seasons. For a similar but more durable filter that is designed to be re-used, we recommend the Pipercross PX300 Air Filter for FF1600 (Part No. 1265-001). Fits Weber 32/36 DGV (including 5A), DGAV, and DGEV as well as 38/38 DGAS and DGES carburetors. May not fit clones, copies, knock-offs, or "work-alike" carburetors not made by Weber. Does not fit Weber DF-series.
If the bodywork cuts into the space needed for the air filter, the filter will easily deform for clearance without adversely affecting airflow.
Pipercross PX400 Filter Mounting Instructions
