For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum fuel delivery 45 gallons per hour. Maximum pressure 6.5 to 7.5 psi. Typical flow 35 gallons per hour at 2 psi. 1/4 NPT female ports. Negative ground (12v) only. This pump features a 400 micron internal filter.
This pump does not have an anti-siphon valve, so fuel can be pulled through the pump when it is turned off. Facet pump number 480534 (E). This pump can also replace the old Bendix/Facet pump number 480588. This is the correct fuel pump for the original Formula Mazda.
Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points!
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere. Facet pumps are still Made in the USA.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.