Rebuild Kit for Universal (unthreaded) Hydraulic Perch
Ring Terminals for 6 Gauge Battery Cable
Hyperco Universal Hydraulic Spring Perch (not threaded)
AN5 Airframe Bolt, 5/16-24 Thread
AN316 Thin Jam Nut (Non-Locking Check Nut)
"I emailed you at 8:00 am Saturday morning, stuff arrived in Sydney at 1:45 am Sunday, and delivered to my office 2:00 pm today Monday. Can't get much better service than that." G.B. from Australia
These special gap setting rings are required when rebuilding the ICP/Hyperco Universal Slide-On Hydraulic Spring Centering Perch (Part No. 1870-2.50, sold separately). Each set of two half-rings is designed to set the perch with a specific gap. One set can be reused for many rebuilds. Rebuild kit sold separately.
Enter desired order quantities below, then click the "Add selected quantities to cart" button.
1874-.096Condition: NewSKU: 54512
Hyperco Gap Setting Ring for Hydraulic Perch, 0.096 inch
1874-.101Condition: NewSKU: 73478
Hyperco Gap Setting Ring for Hydraulic Perch, 0.101 inch
1874-.109Condition: NewSKU: 54513
Hyperco Gap Setting Ring for Hydraulic Perch, 0.109 inch
1874-.113Condition: NewSKU: 54514
Hyperco Gap Setting Ring for Hydraulic Perch, 0.113 inch
1874-.126Condition: NewSKU: 54496
Hyperco Gap Setting Ring for Hydraulic Perch, 0.126 inch