Customers who purchased this item also purchased:

Aurora 1/4-28 Female Rod End for Throttle Cable (loose)

Quick Release Stud Type Ball Joint with 1/4-28 Threads

Carbon Steel Rod End, Female Threaded Shank, PTFE Lined

AN316 Thin Jam Nut (Non-Locking Check Nut)

What our customers are saying:

"Thanks, you're the best! Pegasus has other customers local to me and they told me the service was great! They were right."
C.F. from Australia

Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread

These heavy-duty cables are often used on adjustable sway bars, but they also work very well as shifter cables. Their operation is so smooth, some of our customers even use them as throttle cables. The 5" minimum bend radius lets them fit tight installations. These cables have a working load rating of 60 pounds in compression and 120 pounds in tension. The stainless steel inner core makes them suitable for marine use.

This "4 Series" version has 1/4-28 UNF male threads at each cable end (our standard "3 Series" cables have 10-32 UNF threads). Both ends of the housing are threaded (5/8-18 UNF) and include two jam nuts for easy bulkhead installation with approximately 3/4 inch of adjustment per end. All lengths have 3 inches of travel.

Length is measured from end-to-end of the inner cable including the threaded ends.

Standard Dimensions for Push-Pull Cables
Thread	1/4-28 (SAE UNF), 1" long
Bulkhead Mount (middle of thread) to Cable End (min)	6.19"
Bulkhead Mount (middle of thread) to Cable End (max)	9.19"
Travel	3"
Bulkhead Mount (middle of thread) to End of Jacket	5 1/8"
All dimensions are +/- 1/4"

These cables are rated for operating temperatures up to 225° F (107° C). If your application will exceed this limit, you will need to insulate your cable with one of our insulation products such as Aeroquip Fire Sleeve (Part No. 3299-.44) or Thermo-Tec Thermo-Sleeve (Part No. 1835-125).

Enter desired order quantities below, then click the "Add selected quantities to cart" button.

Order Qty	Part No.	Desc.	Price	Stock Status
	4691-24 Condition: New SKU: 86620	24 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$86.99	In Stock
	4691-36 Condition: New SKU: 86859	36 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$82.99	In Stock
	4691-48 Condition: New SKU: 85007	48 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$86.99	In Stock
	4691-60 Condition: New SKU: 85008	60 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$91.99	In Stock
	4691-72 Condition: New SKU: 85009	72 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$93.99	In Stock
	4691-84 Condition: New SKU: 85010	84 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$104.99	In Stock
	4691-96 Condition: New SKU: 85011	96 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$100.99	In Stock
	4691-108 Condition: New SKU: 85012	108 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$104.39	In Stock
	4691-120 Condition: New SKU: 86997	120 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$107.59	In Stock
	4691-132 Condition: New SKU: 86998	132 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$111.59	In Stock
	4691-144 Condition: New SKU: 85103	144 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$144.99	In Stock
	4691-192 Condition: New SKU: 88434	192 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$152.99	Not In Stock notify me when available
	4691-240 Condition: New SKU: 88435	240 inch Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread	$163.99	Not In Stock notify me when available

Customers who purchased this item also purchased
1/4-28 Forged Yoke & Pin Assembly	Aurora 1/4-28 Female Rod End for Throttle Cable (loose)	Quick Release Stud Type Ball Joint with 1/4-28 Threads	Carbon Steel Rod End, Female Threaded Shank, PTFE Lined	AN316 Thin Jam Nut (Non-Locking Check Nut)

Push-Pull Cable with Bulkhead Ends, 1/4-28 Thread

Order Qty

Part No.

Desc.

Price

Stock Status

Customers who purchased this item also purchased

Related Product Groups

Sway Bar Adjusters & Push-Pull Adjuster Cables