These light-duty Camloc studs are rated for 200 pounds working strength (ultimate tensile strength 300 pounds). The cross-recess head allows use with standard Phillips-blade screwdrivers (no special tools needed). The 26-Series are easily identified by the 1/4" diameter head (larger Camloc 40-Series Studs have a 3/8" diameter head). Each stud assembly consists of the stud, crosspin, barrel, and spring. Sold individually.
The dash number is normally stamped on the head of the stud. This number corresponds to the overall stud length in inches using the following formulae:
Dash number = (Length - 0.73) / 0.03
Length = (Dash Number * 0.03) + 0.73
| 2600 Series Camloc Stud Size Chart |
|---|
| Stud Dash Number | Stud Length
(Overall) | Total Grip* |
|---|
| 2600-1 | 0.76" | .030"-.059" |
| 2600-2 | 0.79" | .060"-.089" |
| 2600-3 | 0.82" | .090"-.119" |
| 2600-4 | 0.85" | .120"-.149" |
| 2600-5 | 0.88" | .150"-.179" |
| 2600-6 | 0.91" | .180"-.209" |
| 2600-7 | 0.94" | .210"-.239" |
| 2600-8 | 0.97" | .240"-.269" |
| 2600-9 | 1.00" | .270"-.299" |
| 2600-10 | 1.03" | .300"-.329" |
| 2600-11 | 1.06" | .330"-.359" |
| 2600-12 | 1.09" | .360"-.389" |
| 2600-13 | 1.12" | .390"-.419" |
| 2600-14 | 1.15" | .420"-.449" |
* Total Grip is the total thickness of the panels to be fastened, measured from the front of the removeable panel to the top of the receptacle (do not include the receptacle).
Note: We are only able to supply this style in the sizes shown as "In Stock" below. Stud lengths in the table above are provided for reference only.
