Brand: Hawk Performance Products
FMSI D273. Fits:
1984-85 Honda Accord
1993-2000 Honda Civic Coupe DX / HX
1993-97 Honda Civic Del Sol Si / S
1988-2000 Honda Civic Hatchback except 1994-95 with ABS
1988-2000 Honda Civic Sedan except 1990-2000 EX and 1994-96 with ABS
1988-91 CRX DX
1988-89 CRX Si
Ferro-Carbon is a unique, high-tech family of friction materials developed and manufactured by Hawk Brake for the racing community. Hawk Pads do not require an extensive "bedding-in" procedure. Keep in mind however, that all disc brake pads require a short period of bedding-in before being used to the maximum of their potential.
Blue (E): Also known as Blue 9012 (the original Blue compound). Medium/High torque racing compound with medium initial bite. The wide temperature range and good brake modulation have made it the #1 pad material for SCCA. Recommended for Production, IT, F2000, Formula Ford, S2000, CSR, and DSR. 250-1000° F (350-800° F optimal).
DTC-60 (G): Very high torque racing compound with high initial bite. DTC-60 was developed as a rear pad to be used with DTC-70 on the front, but it has also become popular as a front pad on lighter cars. Available only for a limited selection of popular racing calipers. Recommended for Trans-Am, GT1, CART, Formula Atlantic, F2000, F3000, and Sports Prototypes. 400-1600° F (700-1100° F optimal).
DTC-70 (U): Extremely high torque racing compound with very high initial bite. Designed to be the most controllable racing brake pad available. Intended for heavier sedans and formula cars with lots of tire and downforce. This compound works best when very hot. Available only for a limited selection of popular racing calipers. Recommended for Trans-Am, GT1, CART, Formula Atlantic, F3000, and Sports Prototypes. 400-1600° F (800-1200° F optimal).
HP Plus (N): Designed as an autocross (Solo II) and track day (Solo I) compound. Very wide temperature range makes it suitable for all forms of autocross, yet still streetable. Expect an increase in dust, noise, and rotor wear. 100-800° F (100-600° F optimal).
HPS (F): HPS = High Performance Street. This compound will outperform OEM pads without sacrificing street manners. A good choice for Solo II; also recommended for amateur to intermediate drag racing. Effective from dead cold up to 700° F (100-500° F optimal).
HPS 5.0 (B): The next-generation development of the popular HPS street compound, HPS 5.0 offers increased friction without increasing noise or dust. Tuned for use with ABS and suitable for spirited street driving.
