Brand: AIM Sports
| This item qualifies for FREE Shipping in the continental United States! |
The EVO6L is an evolution of the powerful yet very compact EVO4 data logger, designed to take advantage of the extensive CAN connectivity of AiM accessories. It uses the same screw-in input ports as the EVO4, but the internals support the new Race Studio 3 software and XRK data file format. The EVO6L is small enough for the tightest installations (only 130mm Long x 46.6mm High x 26mm Deep), but AiM's CAN connectivity gives it virtually unlimited potential for expansion into just the data acquisition system you need. The flexible configuration lets it grow with you.
Features include:
- Internal 3-axis g-sensor (configurable for mounting in any of 8 orientations)
- Internal 3-axis gyroscope
- GPS Module (pre-configured to provide speed and lap time signals) with dedicated GPS port
- 5 configurable analog input channels (4-pin 712-type screw-in ports, 1 per channel)
- CAN port for almost unlimited number of expansions
- Vehicle speed automatically calculated by GPS
- 2 wheel speed input channels
- RPM input channel (sampled from ignition signal or ECU)
- Lap Timer (GPS-based standard; can add optical or magnetic systems sold separately)
- 4 GB on-board non-volatile memory (expandable by adding AiM Memory Module, Part No. MC-720, sold separately)
- 1 digital output
- Connection to ECUs via CAN, K-Line, or RS232
- USB cable download to PC
Sensors sold separately.
Kit includes EVO6L logger, GPS module (choose 1.3m or 4 cable), CAN wiring harness, RPM/Digital Out wiring harness, Power cable, and USB download cable. All sensors sold separately. Race Studio 3 software is always available as a free download from AiM.
Note: This is a data logger only. You must add the AiM GS-Dash Display (Part No. MC-232, sold separately) in order to display the data without downloading to a computer. No display is included with this logger. Use of a dash display along with any other CAN peripherals other than GPS (Lambda, Channel Expansions, TC Hub) also requires the addition of a AiM 4-Port CAN Data Hub (Part No. MC-329, sold separately).
