Sabelt Silver Series A622 Formula 2x2 FIA Harness, Pull Up

Brand: Sabelt

This 6-point 2x2 harness from Sabelt is specifically designed for formula cars where the driver is wearing a HANS Device. The anti-sub straps pass through loops on the lap belt and get captured by the two shoulder belts when they snap into the camlock buckle. This provides proper separation between the sub straps for comfort and safety in lay-down seats.

The Sabelt Silver Series uses professional-level aluminum adjusters on the shoulder belts for light weight. The 2" lap belt has bolt-in end plates sewn in (1/2" bolt holes), with extra-strong steel pull-up adjusters** and a 3" pad behind the buckle. The 2" shoulder belts and 2" sub straps are equipped with bolt-in end plates (1/2" bolt holes) that can convert to wrap-around mount. Unlike many other brands, the sub strap loops on the lap belt are sewn webbing, rather than metal D-rings. FIA 8853-2016 homologated. Available in Black, Blue, or Red.

Strap lengths (all lengths are maximum length adjustment unless noted):
Shoulder strap, mount to adjuster: 700mm (25.6") *
Shoulder strap, adjuster to buckle: 440mm (17.3")
Lap belt, mount to adjuster: 120mm (4.7") fixed
Lap belt, adjuster to buckle: 530mm (20.9")
Anti-sub straps: 1200mm (47.2")
* Note: The shoulder strap measurement was 900mm (35.4") until the 2019 model year (harnesses expiring at the end of 2024).
** Note: The lap belt adjusters were light steel/aluminum until the 2025 model year (harnesses expiring at the end of 2030).