Brand: Sabelt
| This item qualifies for FREE Shipping in the continental United States! |
This 6-point 2x2 harness from Sabelt is specifically designed for formula cars where the driver is wearing a HANS Device. The anti-sub straps pass through loops on the lap belt and get captured by the two shoulder belts when they snap into the camlock buckle. This provides proper separation between the sub straps for comfort and safety in lay-down seats.
The Sabelt Steel Series uses high-strength steel adjusters on the shoulder belts for economy. The 2" lap belt has bolt-in end plates sewn in, with pull-up adjusters and a 3" pad behind the buckle. The 2" shoulder belts have an unusual sewn loop at the end for cross-bolt mounting. Note that your chassis must have a cross-bolt mount to use this type. The 2" sub straps are equipped with dual bolt-in end plates that trap the belt in place when bolted in. Unlike many other brands, the sub strap loops on the lap belt are sewn webbing, rather than metal D-rings. FIA 8853-2016 homologated. Available in Black, Blue, or Red.
Strap lengths (all lengths are maximum length adjustment unless noted):
Shoulder strap, loop to adjuster: 320mm (12.6") fixed
Shoulder strap, adjuster to buckle: 440mm (17.3")
Lap belt, mount to adjuster: 120mm (4.7") fixed
Lap belt, adjuster to buckle: 400mm (15.7")
Anti-sub straps: 950mm (37.4")
