Brand: Davies Craig
Davies Craig Electric Water Pumps replace and out-perform all existing belt-driven water pumps available today. See an increase in cooling capacity while freeing up valuable horsepower.
The 80 liter per minute EWP80 model is rated for engines up to 2.0L normally-aspirated, unmodified engines. Larger engines can use two pumps (Example: Ferrari 550GTO V-12 Le Mans cars used one pump per cylinder bank). It is also ideal for additional cooling for large intercooler heat exchangers. Weighs just 2 pounds and draws only 7.5 amps at full flow.
Included in the kit is everything you need to fit it to your vehicle in an afternoon, including easy to follow installation instructions. Inlet and outlet ports have 6-bolt flanges to accept bolt-on fittings. One straight and one 90 degree fitting are included to fit 35mm (1 3/8") ID coolant hose. Both will fit either the inlet or outlet. The fittings can be arranged in dozens of different configurations to suit just about any installation. Adapter sleeves are included to fit 38mm (1 1/2") ID hoses. Bolt-on adapters for threaded fittings are also available separately.
For best performance, we recommend the optional Davies Craig LCD Digital Water Pump Controller (Part No. DC8002, sold separately). The controller electronically senses engine heat and adjusts the rate of coolant flow accordingly, even after engine shut down. Simply set your desired engine temperature and let the controller do the rest!
Note: Vehicles running on Liquid Propane Gas (LPG) should also use the Davies-Craig EBP15 Electric Booster Pump in the heater line to prevent freezing of the LPG in the converter.