Tilton Replacement Brake Bias Bar for Floor Mt 900-Series

Brand: Tilton Engineering

This unique bias bar is designed specifically for the Tilton 78-Series Rear Pivot Master Cylinders (sold separately). The open design allows unimpeded motion in 2 directions while needle bearing pivots contribute to smooth operation and repeatability.

Unlike traditional bias bars which get welded to the brake pedal, this bar is bolted in place to allow adjustability in pedal ratio. The bolt-in mount is designed specifically to fit the unique Tilton 900-Series floor-mount pedal assembly. The 3/8-24 female threaded clevises will not work with conventional master cylinders. 7/16-20 threaded bar is designed for 2.6" center-to-center master cylinder spacing.

Note: This assembly is designed to fit the unique pocket machined in the 900-Series Floor-Mount brake pedal only. It is not used on any 600-, 800-, or 850-Series pedals, or the 900-Series Overhung or Firewall-mount pedals.

If you want to adapt a 900-Series bias bar to a non-Tilton pedal, we also offer the Tilton Bolt-On Brake Bias Bar Assembly for 78-Series Masters, Part No. TE 72-280. The bolt-on design us much easier to adapt to other pedal designs.