Also known as the "Bike" Speed Sensor, the Magnetic Wheel Speed Sensor is designed to be mounted to the spindle or hub carrier. The trigger magnet (included) mounts to the wheel, wheel hub, or brake rotor to pass in front of the sensor as the wheel rotates. We also offer Replacement Speed Sensor Magnets for installation on a spare wheel, or for adding multiple trigger points.
This sensor has the 719 (four-pin plastic push-on type) connector to connect to the MyChron3 Plus or Gold Auto dashes, any AiM MXL series dash, or any EVO3 series data logger. The MyChron3 XG-Log requires a 712-719 Patch Cable (Part No. MC-210). The EVO4 requires either the MC-210 patch cable or the Y-Cable for Dual Speed Sensors (Part No. MC-264). The front of the sensor has M8 threads for easy mounting in a bracket you supply.
Tip: Add a longer 719-719 Extension Cable (Part No. MC-211, sold separately) and install your wheel speed sensor with the plug near the suspension pick-up point. In the event of crash damage, the sensor will be much easier to replace without fishing a new lead through the car.