AN Plastic Flare Cap (threaded, not push-on type)
AN Plastic Flare Plug (threaded, not push-on type)
Tilton OT-2 Clutch Pressure Plate Only, 7.25", High Ratio
F3/OT-2 Clutch Disc, 7.25", 1x23 Spline, FC/F2000/S2000
Tilton 3000 Series Hydraulic Release Bearing, 52mm Contact
"You guys provide the best service of any place I do business." J.W. from Oklahoma
Brand: Tilton Engineering
This is a replacement clutch cover only for the Tilton OT-II Single Disc Clutch with Orange Spring (Part No. 163-15-Orn). It does not include the pressure plate, clutch disc, or bolts, but it does include the hardened wear buttons for the cover posts.
The Orange spring is a moderate-strength spring, recommended for cars producing up to 250 lb-ft of torque.
We recommend the use of a Hydraulic Release Bearing (such as our Part No. 163-55) with this clutch. Cars with external slave cylinders should use the Tilton OT-2 Clutch Cover with Buff Spring (Part No. 163-17-Buff).
Follow us on facebook
Pegasus Auto Racing Supplies2475 S 179th StNew Berlin WI 53146 USA
Order Toll Free: 1-800-688-6946 (US & Canada)
Local/International Order Line: 1-262-317-1234
Technical Questions: 1-262-317-1200
Fax Line: 262-317-1201
Email - General Questions: CustSvc@PegasusAutoRacing.com
Email - Technical Product Questions: Tech@PegasusAutoRacing.com
We do our best to ensure that the prices and descriptions shown on our website and in our printed catalog are accurate.However, we reserve the right to correct any errors that may occur.
© 2004 - 2016 Pegasus Auto Racing Supplies, Inc. - All rights reserved