For low fuel requirements on small engines up to about 40 horsepower, a single Solid State pump such as this one is usually sufficient. We also offer several different models with higher flow rates and pressures for engines up to about 150 horsepower. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum fuel delivery 7 gallons per hour at free-flow. Maximum pressure 1 to 2 psi. Typical flow 3 gph at 0.5 psi. 1/8 NPT female ports.
This model also features an anti-drainback check valve and an anti-siphon valve. This same pump was also sold under Kohler part number 2539301. This pump supercedes Facet pump number 40016, and can also replace Facet pump numbers 40226 and 40256.
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere. Facet pumps are still Made in the USA.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.