Aeromotive In-Line Fuel Filters with Male AN Fittings

Protect your fuel system with high-quality filters before and after the fuel pump! These high-flowing in-line filters from Aeromotove can flow over 100 gallons per hour with a pressure drop of less than 1 psi.

The black anodized aluminum body measures just 5 1/2" long (less fittings) x 2" OD. Male AN fittings at each end make it easy to install in your fuel line, and O-ring seals let them handle high pressure without leaks.

100 micron is a coarse mesh, suitable for use as a pre-strainer on the suction side of the fuel pump.
40 micron is an intermediate mesh, recommended for use after the pump in carbureted applications.
10 micron is a fine mesh that should be used after the pump in any application.

Stainless is cleanable and replaceable, compatible with all fuels from gasoline to diesel to alcohol.
Cellulose is an economical material for use with gasoline (to E15) and diesel fuel only.
Microglass is an exotic material that is compatible with all fuels from gasoline to diesel to alcohol.