obp Pro-Race V2 Single Brake Pedal Assemblies

These pedal assemblies are great for converting a street car to a race car, but they are also ideal as a basis for original construction. They can also be a great safety feature for the passenger side of driver's ed cars! Each assembly includes a brake pedal with an adjustable bias bar (7/16-20 thread) for use with dual master cylinders. The universal design will require some modification or fabrication.

The obp Motorsport Pro-Race V2 line features strong, lightweight pedals machined from solid billet. The pedal pad is adjustable vertically and horizontally for best fit. The steel pedal box is stronger and more rigid than the original Pro-Race version, with an improved pedal pivot for less lateral motion.

Top Mount pedals hang down from above the driver's feet. This design is typical of most street cars (except Porsche and air-cooled VW).
Floor Mount boxes mount to the floor of the vehicle. This design is preferred in formula cars because the pedals pivot the same as the driver's ankles.

Bulkhead Mount points the master cylinders forward through the firewall or front bulkhead. You will need to have room in front of the bulkhead for the master cylinders.
Cockpit Fit points the master cylinders backwards, either below (floor mount) or above (top mount) the driver's feet. This is ideal for applications with no room in front of the bulkhead.