Mechanical Gauges
All mechanical temperature gauges (regardless of manufacturer) have a sensor bulb connected to the gauge by a thin capillary tube. This tube is rather fragile and must be handled and routed carefully to prevent damage. As long as the caplillary tube is not damaged, these gauges are quite rugged and dependable.
Auto Meter Mechanical Gauges
|
Racetech Gauges
|
Drive Cables for Mechanical Tachometers
|
Westach EGT / CHT Gauges and Accessories
|
Direct-Mount Fuel Pressure Gauges
|
Related Product Categories |
Gauges Sorted by Display Type |
Recent Top Selling Products for this category | ||
10mm Copper Washer for Racetech Gauge Temp Bulb This 10mm copper washer is used to seal between the female 3/8 BSP gland nut and the male-male adapter on Racetech temperature gauges. | Dual EGT Gauge, 2 1/16 inch, 700 - 1700F Our dual EGT gauges let you monitor 2 cylinders at once. This gauge reads from 700 to 1700F and mounts in a 2 inch hole. Probes sold separately. | EGT Probe, Clamp-On, 1.62 to 2.5 inch Pipe Diameter Our thin .161 inch dia x 1 inch long EGT probes cause no measurable power loss, so they can be used at all times. This probe clamps on to a 1.63 to 2.5 inch OD pipe. |