Facet Dura-Lift II Solid State Fuel Pumps

The original Facet Dura-Lift pumps were originally designed for specific refrigerated truck applications, but they proved so versatile that they have become popular on medium- and light-duty trucks and vans. The new Dura-Lift II series expands on that the versatility to fit even more applications!

The Dura-Lift II is a little smaller and quite a bit lighter than the original Dura-Lift. The smaller package makes it possible to replace a Facet Cube-style, Posi-Flo, or Gold-Flo pump in many applications.

Configuration Options: The Dura-Lift II series pumps are available in 3 pressure/flow/lift models, with one of three wiring pigtails (or no pigtail), and with a built-in 80 micron inlet filter or a more compact filterless version.

x0100 part numbers are rated for 14-18 psi pressure, 34 GPH free flow, and 50" dry lift.
x0101 part numbers are rated for 8-12 psi pressure, 36 GPH free flow, and 120" dry lift.
x0102 part numbers are rated for 5-8 psi pressure, 34 GPH free flow, and 120" dry lift.

x010x-01 part numbers are supplied without a wiring pigtail (customer must supply a male 2-pin Deutsch connector).
x010x-02 part numbers include a wiring pigtail with a 2-pin Weather Pack (Packard/Delphi) connector.
x010x-03 part numbers include a wiring pigtail with two unterminated wires.
x010x-04 part numbers include a wiring pigtail with a 4-pin Deutsch connector.

7010x part numbers have a built-in 80 micron filter.
9010x part numbers have no filter and are equipped with a smaller "no-filter" bowl.