BSP Hose Ends & Braided Stainless PTFE Brake / Clutch Hose
The #3263 hose ends are for use with AN braided brake hose on vehicles with BSP fittings in the brake system. The #3268 hose ends are specially designed to fit the flat port on the inlet of Racetech and Smith's mechanical pressure gauges.
Note: BSP nomenclature can be confusing because the nominal size refers to the inside diameter of the pipe, not the outside diameter of the threads. If you are not sure what size you need, check in our Threaded Fitting Guide or our Guide to BSP Fittings.
Related Technical Documents
Recent Top Seller for this product group
This replacement brass sleeve is used with 3AN PTFE hose end fittings and must be replaced each time a fitting is reused.
* Quantity Pricing Available