Fuel Cell Pickup Outlet Fittings
These bulkhead-type fittings are normally installed in a plate on the fuel cell. The hose from your Fuel Cell Pickup or Surge Tank gets connected to one end, and the fuel feed line to your engine gets connected to the other. All of these fittings have standard male AN fittings on both ends.
Best practice is to install the fitting with the bulkhead (extended) end in the cell, with the nylon washer above the plate and the bulkhead nut below the plate.
Recent Top Seller for this product group
This aluminum 90 degree bulkhead fitting accepts a standard 8AN female hose end at each end. Includes mounting nut and nylon sealing washer.
* Quantity Pricing Available