Fuel Cell Vents & Rollover Valves
Your fuel cell must be able to take in air to allow the fuel to be drawn out, but you also need to keep the fuel in the cell if the car has rolled over. These one-way valves allow air to flow in through the vent line under normal operation, but they completely close off the vent line in the event of a rollover.
Note: Fuel cell vent valves are typically not spring-loaded, and will only close when turned upside-down. Part Nos. FS ITVV06S, FS ITVV08S, and FS ITVV10S are spring-loaded to stay closed when right-side up.
Recent Top Seller for this product group
This two-way check valve closes to minimize evaporation from your fuel cell vent line. If pressure in the tank builds to 0.725 psi, the valve opens to relieve pressure.
|$179.99||Not In Stock|
|$274.99||Not In Stock|